 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Part Number: LM2BG12W www.SunLED.com T-1 3/4 (5mm) SOLID STATE LAMP PRELIMINARY SPEC Features LOW POWER CONSUMPTION. POPULAR T-1 3/4 DIAMETER PACKAGE. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF M2BG (InGaN) 5 30 Unit V mA Operating Characteristics (TA=25C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) Luminous Intensity (IF=20mA) mcd min. LM2BG12W Green InGaN Water Clear 10000 V1 typ. 21990 525 20 P.1/4 VF VF IR M2BG (InGaN) 3.2 3.7 10 Unit V V uA iFS 100 mA PT TA Tstg 111 -40 ~ +85 -40 ~ +85 1000 mW C P 525 nm D 535 nm Electrostatic Discharge Threshold (HBM) Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] V 260C For 3 Seconds 260C For 5 Seconds 39 nm C 65 pF Part Number Emitting Color Emitting Material Lens-color Wavelength nm P Viewing Angle 2 1/2 Published Date : MAR 26, 2008 Drawing No : SDSA6601 Checked : B.L.LIU Part Number: LM2BG12W www.SunLED.com T-1 3/4 (5mm) SOLID STATE LAMP M2BG Published Date : MAR 26, 2008 Drawing No : SDSA6601 V1 Checked : B.L.LIU P.2/4 Part Number: LM2BG12W www.SunLED.com T-1 3/4 (5mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 26, 2008 Drawing No : SDSA6601 V1 Checked : B.L.LIU P.3/4 Part Number: LM2BG12W www.SunLED.com T-1 3/4 (5mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS LM2BG12W Published Date : MAR 26, 2008 Drawing No : SDSA6601 V1 Checked : B.L.LIU P.4/4 |
Price & Availability of LM2BG12W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |